BMW S58 Single Turbo Kit (M2 / M3 / M4 / X3M / X4M)

*Optional GESI High Flow is designed to meet current regulations on vehicles producing up to 1200hp. However, selection of this option does NOT imply this product is suitable for emission controlled vehicles. This product in all variations is still strictly intended for off-road/competition use only and can not be used on public roadways with registered vehicles. Customers are solely responsible for complying with their state, federal, and local ordnances, please review our full terms and conditions upon check out. *

Fits RWD and xDrive Model

Kit Includes:

1.) Turbo
2.) Wastegates 2x Turbosmart 45mm
3.) Coupler 3” (x3)
4.) Hose Clamps 3” (x3)
5.) Manifold True Twin Scroll T4 Divided Dual Wastegate
6.) 3.5″ Down Pipe
7.) Dump Tubes (X2)
8.) Intercooler Piping with 3 Weld Fittings/ 1 BOV Flange
9.) V-Band Clamp for Down Pipe
10.) Turbo Studs & Turbo Gasket (Trimmed Studs)
11.) 10AN Nylon Braid Hose 2ft.
12.) 10AN Hose end Fitting 1 X 45Degree
13.) 10 AN Hose end fitting 1 X 90 degree
14.) Stainless Braid Oil feed Line 2ft. Vibrant
15.) Silicon Vacuum Hose 6ft.
16.) 4AN to 4AN 90 Degree Oil Feed Fitting
17.) Oil Return Block Off Fitting
18.) Oil Feed Block Off Fitting
19.) Oil Return Block Fitting 10AN (use factory bolt and O-ring)
20.) Oil Feed Block Fitting 4AN (use factory bolt and O-ring)
21.) Drain Block Off Front (use factory bolt and O-ring)
22.) Drain Block Off Cap (Factory Style)
23.) Turbo Oil Drain Fitting / with Bolts and O-Ring (x2)
24.) M6x12mm Bolts for Intercooler Piping (X3) [1x for map, 2X for Rad Bracket]
25.) Heat Tape (20 Inches)
26.) Vacuum T Fittings (X2)
27.) KLM Stickers
28.) 1/8″ NPT Plugs (x2)
29.) O2 Sensor Block Off (X2)
30.) Billet Throttle Body Adapter

Coolant Overflow Relocation Kit:

31.a) Relocation Bracket
31.b) 180° Hose
31.c) 90° Hose (22in cut form 90)
31.d) Aluminum Barb Fitting
31.e) 1/4″ Heater Hose (thicker than vacuum hose) 45in
31.f) Brown and Black Wire 5ft.
31.g) 5ft. Wire Loom
31.h) 4X Wire Connector
31.i) 4X 1/4″ Hose Clamps
31.j) 4X 5/8″ Hose Clamps
32.) Turbo drain and feed line heat sleeve (2.5 ft)
33.) Vacuum line heat sleeve (2.5 ft)

**Note** Under belly has to be trimmed for dump tube clearance.